- Scrubs a 20 in path and recovers the water A 30 in suction rake lifts the dirty water back off the floor behind the brush rather than leaving it to dry.
- 21,958 sq ft per hour That work rate puts a large facility inside a few hours per session, before obstacles and tank service are counted.
- Two-tank water system 17 gal of fresh water feeds the scrub while a 13 gal tank holds the recovered waste, drained through a hose on the side of the body.
- More than forty sensors Vision-plus-laser navigation combines panoramic and binocular cameras, LiDAR, 3D time-of-flight, ultrasonic sensing, an IMU and an electronic bumper.
- Three to four hours per charge The DC24V 120Ah battery sets the cleaning window, so larger buildings are usually split into zones across sessions.
- Pads matched to the floor Richtech offers a range of scrubbing pads for common hard-floor types, and the pairing is worth testing before a full rollout.
- Optional mist module and data recorder A top-mounted unit sprays disinfecting mist while the machine works, and operational logging can be specified at order.
Description
The Richtech DUST-E MX is an autonomous wet scrubber for large hard-floor areas. It cleans a 20 in path, recovers the water through a 30 in suction rake, and carries 17 gal of fresh and 13 gal of waste water on a 557 lb machine measuring 44 × 22 × 45 in. It is rated at 21,958 sq ft per hour and runs three to four hours from a DC24V 120Ah battery.
Scrubbing, not sweeping, is what this machine is for: water goes down, dirt is agitated, and the rake lifts the dirty water straight back off the floor. When the waste tank fills, an operator detaches a hose on the side of the body and empties it into a floor drain, after which the robot resumes from the point where it stopped. Mapping drain locations along the planned route is the single biggest thing a facility can do to keep the schedule intact.
Navigation is vision plus laser. The sensor set runs a monocular panoramic camera, a binocular camera, LiDAR, a 3D time-of-flight camera, ultrasonic sensors, an IMU and an electronic bumper as the last line of contact protection; Richtech cites more than forty sensors in total for 360-degree awareness while the machine works. A data recorder can be specified as an option.
DUST-E MX is the large machine in the DUST-E pair. The compact DUST-E S is a 57 lb four-function unit with its own dock; the MX is a 557 lb scrubber built for aisles and concourses, with manual tank service instead of a self-maintenance station. Pads are offered for different hard-floor types, and a top-mounted disinfecting mist module is available, so pad choice and accessories belong in the quotation.
Key Capabilities
- Scrubs a 20 in path and recovers the water: A 30 in suction rake lifts the dirty water back off the floor behind the brush rather than leaving it to dry.
- 21,958 sq ft per hour: That work rate puts a large facility inside a few hours per session, before obstacles and tank service are counted.
- Two-tank water system: 17 gal of fresh water feeds the scrub while a 13 gal tank holds the recovered waste, drained through a hose on the side of the body.
- More than forty sensors: Vision-plus-laser navigation combines panoramic and binocular cameras, LiDAR, 3D time-of-flight, ultrasonic sensing, an IMU and an electronic bumper.
- Three to four hours per charge: The DC24V 120Ah battery sets the cleaning window, so larger buildings are usually split into zones across sessions.
- Pads matched to the floor: Richtech offers a range of scrubbing pads for common hard-floor types, and the pairing is worth testing before a full rollout.
- Optional mist module and data recorder: A top-mounted unit sprays disinfecting mist while the machine works, and operational logging can be specified at order.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Richtech |
|---|---|
| Manufacturer | Richtech Robotics |
| Model | DUST-E MX |
| Product Type | Autonomous commercial floor scrubber |
| Size | 44 in x 22 in x 45 in |
| Weight (without water) | 557 lb |
| Cleanable Width | 20 in |
| Suction Rake Width | 30 in |
| Pressure on the Ground | 60 lb |
| Fresh Water Tank | 17 gal |
| Waste Water Tank | 13 gal |
| Travel Speed | 3.9 ft/s |
| Work Efficiency | 21,958 sq ft/h |
| Gradeability | 6 degrees |
| Battery Life | 3-4 hours |
| Battery Capacity | DC24V, 120Ah |
| Navigation Scheme | Vision + laser |
| Sensors | Monocular panoramic camera, binocular camera, LiDAR, 3D ToF camera, ultrasonic, IMU, electronic bumper |
| Data Recorder | Selectable option |
| Accessories | Scrubbing pads per floor type; top-mounted disinfecting mist module |
| Price | Quotation only |
Industries
Frequently Asked Questions
Rated work efficiency is 21,958 square feet per hour, or roughly 22,000. Actual throughput depends on obstacle density, route complexity and how often the tanks need service.
A 17 gallon fresh tank feeds the scrubbing head and a 13 gallon tank collects what the 30 inch suction rake recovers. Draining is manual: a hose on the side of the body detaches and empties into a floor drain.
It runs three to four hours from a DC24V 120Ah battery. For buildings larger than one charge can cover, splitting the floor into zones across several sessions is the usual approach.
The MX is the large wet scrubber: 557 lb, a 20 inch cleaning path and manual tank service for aisles and concourses. The S is a 57 lb four-function machine with a dock that recharges it and handles its water automatically.
The sensor package covers LiDAR, 3D depth sensing, ultrasonic radar, cameras, an IMU and an electronic bumper, and the manufacturer cites more than forty sensors in total. No independent safety certification is documented, so organisations with strict compliance requirements should request supporting paperwork during procurement.
It is offered by quotation — pad selection, the optional mist module and data recorder, quantity and delivery are confirmed per project.
Recently Viewed
You haven't viewed any products yet.
