- Force control at every joint Six direct-drive micro brushless force-control joints and one geared joint give hybrid force and position control, and each joint reports its torque.
- Three fingers, 7 degrees of freedom Three in the thumb, two in the index finger and two in the middle finger, with the thumb's first joint turning through ±60°.
- Stiffness and damping commands Each joint takes position, velocity, torque, stiffness and damping commands, so grasps can be set compliant or firm in software.
- 1,000 Hz over USB 2.0 Joint mode, position, velocity, torque, temperature, voltage, current and IMU data stream at 1,000 Hz, in packets of 1,234 bytes out and 1,270 bytes back.
- 710 g at 175 × 88 × 77 mm Fingertips repeat to ±2 mm, and the hand grasps up to 500 g on a 5 cm round object, palm down or palm left.
- 12–58 V, −20 to 60 °C The hand draws 0.2 A at rest at 58 V and up to 10 A, with 400 W available for 3 s.
Description
The Unitree Dex3-1 is Unitree's three-finger dexterous robotic hand, and this is its force-controlled build without pressure-sensor arrays, made for the Unitree H2 humanoid and supplied as one hand, left or right. A thumb with three degrees of freedom works against an index and a middle finger with two each, seven in all, on a 710 g hand measuring 175 × 88 × 77 mm.
Control at the joint itself is the point of this hand. Six joints are direct-drive micro brushless force-control units and one is geared; each measures its torque and takes position, velocity, torque, stiffness and damping commands, so the hand can close softly around an object or hold it firmly. For H2 teleoperation, grasp research and reinforcement learning where contact can be read from joint torque, it is the simpler way to give the robot working hands.
Fingertips repeat to ±2 mm, and Unitree rates the grasp at up to 500 g on a 5 cm round hard object, palm down or palm left, with up to 400 W for 3 s. Communication is USB 2.0 at 1,000 Hz, returning joint mode, position, velocity, torque, temperature, voltage, current and IMU data, on a 12–58 V supply that draws 0.2 A at rest and up to 10 A; the hand works from −20 to 60 °C.
The Dex3-1 Tactile for the H2 is the same hand with 33 pressure sensors for contact-rich work, and G1 owners have the Dex3-1 for the G1. For five fingers on the H2, see the Unitree Dex5-1, or browse all our dexterous robotic hands.
Key Capabilities
- Force control at every joint: Six direct-drive micro brushless force-control joints and one geared joint give hybrid force and position control, and each joint reports its torque.
- Three fingers, 7 degrees of freedom: Three in the thumb, two in the index finger and two in the middle finger, with the thumb's first joint turning through ±60°.
- Stiffness and damping commands: Each joint takes position, velocity, torque, stiffness and damping commands, so grasps can be set compliant or firm in software.
- 1,000 Hz over USB 2.0: Joint mode, position, velocity, torque, temperature, voltage, current and IMU data stream at 1,000 Hz, in packets of 1,234 bytes out and 1,270 bytes back.
- 710 g at 175 × 88 × 77 mm: Fingertips repeat to ±2 mm, and the hand grasps up to 500 g on a 5 cm round object, palm down or palm left.
- 12–58 V, −20 to 60 °C: The hand draws 0.2 A at rest at 58 V and up to 10 A, with 400 W available for 3 s.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex3-1 (force-controlled) |
| Compatible robot | Unitree H2 (H2-dedicated version) |
| Hand side | Left or right, one hand per unit, chosen with the order |
| Fingers | 3 |
| Degrees of freedom | 7: thumb 3, index finger 2, middle finger 2 |
| Drive | 6 direct-drive micro brushless force-control joints, 1 gear-driven joint |
| Control | Hybrid force and position control |
| Thumb joint ranges | Joint 0: −60° to 60°; joint 1: −35° to 60°; joint 2: 0–100° |
| Index and middle finger joint ranges | Joint 0: 0–90°; joint 1: 0–100° |
| Weight | 710 g |
| Size (flat) | 175 × 88 × 77 mm |
| Fingertip repeat positioning accuracy | ±2 mm |
| Grasp load | Up to 500 g on a 5 cm round hard object, palm down or palm facing left |
| Peak power | 400 W for 3 s |
| Pressure sensors | None (33 on the Dex3-1 Tactile) |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current; IMU data |
| Working voltage | 12–58 V |
| Current | 0.2 A static at 58 V, 10 A maximum |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Packet size | 1,234 bytes sent, 1,270 bytes received |
| Control commands | Joint mode, position, velocity, torque, stiffness, damping |
| Working temperature | −20 to 60 °C |
Industries
Frequently Asked Questions
The Unitree Dex3-1 Force-Controlled Three-Finger Hand for H2 is priced at 38.100 lei in your market.
Six of its seven joints are direct-drive micro brushless force-control units and one is geared. Each joint measures and commands torque, so the hand runs hybrid force and position control and can be made compliant through stiffness and damping commands.
No. This is the force-controlled build; the Dex3-1 Tactile for the H2 adds 33 pressure sensors in 9 arrays sensing 10 g to 2,500 g. Without them, contact is read through joint torque.
Up to 500 g on a 5 cm round hard object, palm down or palm left, with up to 400 W for 3 s. Fingertips repeat to ±2 mm.
Over USB 2.0 at 1,000 Hz on a 12–58 V supply, returning joint mode, position, velocity, torque, temperature, voltage, current and IMU data. Mounting and cabling on your H2 are confirmed with the quotation.
Each unit is one hand with the side chosen at order, so a two-handed H2 needs one of each. The G1 has its own Dex3-1 versions.
Unitree Dex3-1 Force-Controlled Three-Finger Hand for H2
- Regular price
- 38.100,00 lei
- Sale price
Recently Viewed
You haven't viewed any products yet.
