- Tactile palm, pads, tips and roots 94 pressure sensors in 12 arrays cover the palm, every finger pad and fingertip and four finger roots, sensing from 10 g to 2,500 g.
- Pressure in the joint stream Sensor pressure and temperature arrive with joint position, velocity, torque and IMU data over USB 2.0 at 1,000 Hz.
- RGB camera included The H2 version comes with an RGB camera for a close view of the grasp; its model and mounting are confirmed with the quotation.
- 16 active joints of 20 Four driven joints in the thumb and three in each finger, all backdrivable, with ±22° of lateral swing across the four fingers.
- 4.5 kg grasp load, 10 N fingertips Holding a 5 cm round object the hand carries 3.5 kg palm down and 4.5 kg palm facing left, and the arrays take 20 kg without damage.
- Replaceable fingers, open software Each of the five fingers can be swapped on its own, and Unitree opens the hand, tactile algorithms included, to secondary development.
Description
The Unitree Dex5-1P is the tactile build of Unitree's five-finger dexterous robotic hand, supplied here for the Unitree H2 humanoid as one hand, left or right, with an RGB camera. The P marks its 94 pressure sensors in 12 arrays: a 2 × 5 array in the palm and 2 × 3 arrays on each finger pad, each fingertip and four finger roots, sensing from 10 g to 2,500 g.
On an H2 it is the five-finger hand for contact-rich research: in-hand manipulation, slip and force regulation, and imitation-learning demonstrations recorded with touch, joint data and a close camera view together. Pressure and sensor temperature arrive in the same 1,000 Hz USB 2.0 stream as joint position, velocity, torque, temperature, voltage, current and IMU data, and the arrays take 20 kg without damage.
The hand under the sensors is the Dex5-1: 20 degrees of freedom with 16 active, four in the thumb and three in each finger, backdrivable force-controlled joints on hollow-cup motors, five individually replaceable fingers, 10 N fingertips with ±1 mm repeatability and a 10 mm minimum grip. Holding a 5 cm round object it carries 3.5 kg palm down and 4.5 kg palm facing left. It weighs 1,100 g, measures 217.3 × 127.5 × 72.1 mm flat and runs on 24–60 V.
The Dex5-1 for the H2 is the same hand without the pressure sensors, and the Dex5-1P left hand for the H1 and H1-2 brings this tactile hand to those robots. For three fingers with touch on the H2, see the Dex3-1 Tactile; every other option is in our dexterous robotic hands.
Key Capabilities
- Tactile palm, pads, tips and roots: 94 pressure sensors in 12 arrays cover the palm, every finger pad and fingertip and four finger roots, sensing from 10 g to 2,500 g.
- Pressure in the joint stream: Sensor pressure and temperature arrive with joint position, velocity, torque and IMU data over USB 2.0 at 1,000 Hz.
- RGB camera included: The H2 version comes with an RGB camera for a close view of the grasp; its model and mounting are confirmed with the quotation.
- 16 active joints of 20: Four driven joints in the thumb and three in each finger, all backdrivable, with ±22° of lateral swing across the four fingers.
- 4.5 kg grasp load, 10 N fingertips: Holding a 5 cm round object the hand carries 3.5 kg palm down and 4.5 kg palm facing left, and the arrays take 20 kg without damage.
- Replaceable fingers, open software: Each of the five fingers can be swapped on its own, and Unitree opens the hand, tactile algorithms included, to secondary development.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Unitree Robotics |
|---|---|
| Model | Dex5-1P (tactile) |
| Compatible robot | Unitree H2 (H2-dedicated version) |
| Hand side | Left or right, one hand per unit, chosen with the order |
| Fingers | 5, each replaceable on its own |
| Degrees of freedom | 20 (16 active, 4 passive) |
| Active joints | Thumb 4; index, middle, ring and little finger 3 each |
| Transmission | 12 micro force-controlled composite transmission joints, 4 micro force-controlled gear-transmission joints |
| Motors | Hollow-cup motors with high-precision encoders; backdrivable joints |
| Thumb joint ranges | Joint 0: −33.5° to 39°; joint 1: 0–100°; joint 2: 0–110°; joint 3: 0–92° |
| Finger joint ranges | Knuckle 0: −22° to 22°; knuckle 1: 0–90°; knuckle 2: 0–95°; knuckle 3: 0–81° (coupled with joint 2) |
| Four-finger lateral swing | ±22° |
| Weight | 1,100 g |
| Size (flat) | 217.3 × 127.5 × 72.1 mm |
| Fingertip strength | 10 N |
| Fingertip repeat positioning accuracy | ±1 mm |
| Minimum grip diameter | 10 mm |
| Grasp load, palm down | Up to 3.5 kg (5 cm round hard object, room temperature) |
| Grasp load, palm facing left | Up to 4.5 kg (5 cm round hard object, room temperature) |
| Pressure sensors | 94 in 12 arrays |
| Array layout | Palm 2 × 5; each finger pad 2 × 3 (× 5); each fingertip 2 × 3 (× 5); each finger root 2 × 3 (× 4) |
| Pressure perception range | 10 g – 2,500 g |
| Maximum load without damage | 20 kg |
| Feedback | Joint mode, position, velocity, torque and temperature; voltage and current; sensor pressure and temperature; IMU data |
| Camera | RGB camera included; model and mounting confirmed with the quotation |
| Communication interface | USB 2.0 |
| Communication rate | 1,000 Hz |
| Control commands | Joint mode, position, velocity, torque, stiffness and damping |
| Working voltage | 24–60 V |
| Current (at 58 V) | 0.2 A static, 4 A maximum |
| Working temperature | −20 to 60 °C |
| Software | Open for secondary development |
Industries
Frequently Asked Questions
The Unitree Dex5-1P Tactile Dexterous Hand for H2 is priced at 93.500 lei in your market.
94 pressure sensors in 12 arrays: a 2 × 5 array in the palm and 2 × 3 arrays on each finger pad, each fingertip and four finger roots. They sense from 10 g to 2,500 g and take 20 kg without damage.
The Dex5-1P adds the 94 pressure sensors, reports their pressure and temperature with the joint data and comes with an RGB camera. Joints, weight, grasp load and interface are the same.
It weighs 1,100 g. Holding a 5 cm round hard object it carries up to 3.5 kg palm down and 4.5 kg palm facing left, and each fingertip pushes with 10 N.
Over USB 2.0 at 1,000 Hz on a 24–60 V supply, streaming joint, pressure, temperature and IMU data. Mounting, cabling and the camera position on your H2 are confirmed with the quotation.
Each unit is one hand, left or right, chosen with your order, so a two-handed H2 needs one of each. A separate Dex5-1P left hand is made for the H1 and H1-2.
Unitree Dex5-1P Tactile Dexterous Hand for H2
- Regular price
- 93.500,00 lei
- Sale price
Recently Viewed
You haven't viewed any products yet.
