{"product_id":"wonik-bcu-automatic-battery-replacement-system","title":"Wonik BCU Automatic Battery Replacement System","description":"\u003cp\u003eThe BCU is a battery exchange station, not a robot. It does not drive, carry anything or perform tasks of its own. A mobile robot comes to it, the station takes the depleted pack out and fits a charged one, and the robot goes back to work while the removed pack recharges in a slot. The manufacturer presents that as a way to keep a fleet running without charging pauses; how far it goes depends on fleet size, duty cycles and planning rather than on the station alone.\u003c\/p\u003e\u003cp\u003eThe exchange itself is specified at within 60 seconds. Pickup uses a magnet-type mechanism with automatic detection, helped by a single vision unit that finds the pack and corrects for misalignment within ±15 mm on both X and Y to an accuracy of ±0.2 mm — so a robot does not have to stop perfectly, only close enough. Local communication with autonomous mobile robots is RF PIO; anything beyond that interface is confirmed with the manufacturer.\u003c\/p\u003e\u003cp\u003eCharging runs on a constant current \/ constant voltage profile to a maximum of 29 V, with a four-step current increase after the start that the manufacturer calls a slow start. The station also monitors packs by charge level and discharges them automatically, and it supports power failure compensation when external power is supplied. Operators work through a touch panel and buttons, with one emergency stop and a four-colour indicator plus warning sound.\u003c\/p\u003e\u003cp\u003eRead the battery line carefully. The pack is Li-ion, rated 25 V 100 A; its amp-hour capacity is confirmed with the quotation, so the rating should not be converted into Ah, watt-hours or runtime. The 15 kg figure is the mass of the battery, not of the station. The three-slot unit measures 900 x 1,550 x 1,350 mm and needs a 220 VAC \/ 30 A supply, an ambient range of 0 to +40 degrees Celsius, and a floor free of water, oil and dirt.\u003c\/p\u003e\u003ch3\u003eKey Capabilities\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwap instead of wait:\u003c\/strong\u003e The station lifts a depleted pack out of a mobile robot and fits a charged one, so the robot leaves with a full battery rather than standing on a charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplacement within 60 seconds:\u003c\/strong\u003e That figure covers the exchange operation itself; recharging the removed pack happens afterwards in a slot while the robot is already back at work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree charging slots:\u003c\/strong\u003e The station holds three packs under automatic charging management, and the manufacturer notes that slot quantity can be changed, with total height following the slot count.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVision-guided magnet pickup:\u003c\/strong\u003e A magnet-type mechanism with automatic detection picks the pack up, and one vision unit corrects its position within ±15 mm on X and Y to an accuracy of ±0.2 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCC\/CV charging with a slow start:\u003c\/strong\u003e Charging follows a constant current \/ constant voltage profile to a maximum of 29 V, with the current raised in four steps after the start for a slow start.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge-level discharge management:\u003c\/strong\u003e The station monitors packs by charge level and discharges them automatically, and supports power failure compensation when external power is supplied.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperator panel and alarms:\u003c\/strong\u003e A touch panel and buttons run the station, one emergency stop is fitted, and a four-colour indicator with a warning sound shows status across the floor.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.\u003c\/p\u003e\u003ch3\u003eBuying through Robotix Market\u003c\/h3\u003e\u003cp\u003eThis unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.\u003c\/p\u003e","brand":"Wonik Robotics","offers":[{"title":"Default Title","offer_id":67847228096802,"sku":"Wonik-BCU","price":0.0,"currency_code":"RON","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1022\/0693\/1234\/files\/wonik-bcu-01.png?v=1794972755","url":"https:\/\/robotixmarket.ro\/en\/products\/wonik-bcu-automatic-battery-replacement-system","provider":"Robotix Market Europe","version":"1.0","type":"link"}